References

The experience we have accumulated over the decades has borne many fruits. On this page, you will find problems that we have solved – joint successes with our customers.

Fall protection for a train unloading station

Enmac developed a safety structure that meets the requirements of both variable equipment and the maintenance platform standard.
Chemical loading and unloading stations

Next-generation log stacker

The customer wanted to create a next-generation log stacker with state-of-the-art technology, yet is also competitive in terms of price.
Mechanical engineering

Autoclave pressure vessel

The customer needed equipment for heat treating its own product. The starting data was only the number of degrees to which the temperature of the product had to be momentarily raised.
Mechanical engineering

Product development of a filling material installation device

A device was to be developed for the spent nuclear fuel disposal cave to safely and at the required speed pile tunnel filling blocks squeezed from clay into the disposal tunnels deep underground. In addition to installation precision, quality control and safety, the location of the cave at a depth of about 400 metres had to be taken into account in the design: the environmental conditions and the cramped nature of the tunnel, as well as possible changes in the filling pattern of the blocks, for example.
Mechanical engineering

Manufacturing design for a part in the fusion reactor chamber of the ITER project

The customer needed a partner for the design of a part – Divertor Cassette Body – inside the fusion reactor chamber of the ITER project, the world’s first fusion reactor. The large stainless steel part belongs to a structure that minimises the amount of impurities in the fusion plasma and recovers some of the thermal energy of the plasma.
Mechanical engineering

Generator lifting device

Enmac carried out mechanical engineering, standard strength surveys and the required CE documentation for the lifting and turning device.
Mechanical engineering

3D model and manufacturing drawings for an existing product

Enmac modelled the product and prepared complete manufacturing drawings based on the model.
Mechanical engineering

Modernisation of a drilling rig

Enmac implemented the technical design, strength calculation and documentation necessary for the implementation of the drilling rig drilling unit.
Mechanical engineering

Wind turbine lifting accessory

A lifting accessory was needed to lift a 250-tonne wind turbine to a height of 125 metres.
Mechanical engineering

Laser module

Enmac designed the laser module enclosure and the mechanical components and fibre tracks inside it.
Mechanical engineering

Bioethanol plant

Enmac implemented the entire plant and mechanical engineering of the bioethanol plant based on the customer’s process specifications.
Environmental services

Glass processing line

In cooperation with the customer, Enmac developed a modular bending line and took care of the documentation of product information. Design and documentation were carried out online through a remote connection directly to the customer’s database.
Mechanical engineering

Pump set

Enmac designed a seawater cooling unit in which the seawater pipeline is made of plastic and the closed cooling circuit pipeline is made of acid-resistant steel.
Mechanical engineering

Wind turbine transport platform

Enmac developed the lightest possible transport frame for the wind turbine using high-strength steels and the enclosure structure.
Mechanical engineering

Mobile biogas plant

Improving the prototype of a biogas power plant placed in a container, built almost without manufacturing drawings, and its productisation.
Environmental services

Lifting and turning tools for assembly

Enmac specified the lifting and turning events and designed the necessary tools on the basis of the specifications, and was responsible for the CE documentation of the equipment.
Mechanical engineering

Assembly station and its special tools

Enmac developed the assembly method and prepared plans for the necessary tools and lifting equipment.
Mechanical engineering

Valve test station

Enmac designed a fully automatic testing system in cooperation with the customer’s personnel.
Mechanical engineering

Turbine modernisation of a nuclear power plant

Enmac sent a project manager to the site to take care of the smooth replacement project of the non-return valves of the intermediate intakes with a maximum diameter of one metre, located in the turbines of the nuclear power plant. Project management was carried out in accordance with the extremely strict quality requirements of nuclear power plant projects.
Mechanical engineering

Product development of a miniature gear

Enmac designed the most cost-effective miniature gear using the Design-to-cost method.
Mechanical engineering

Product development of a sailboat drive

Enmac implemented the dimensioning and design of the drive shafts and bearing. This was done on the basis of the finite lifespan theory in cooperation with the gear manufacturer. The casting frame of the unit was designed based on the designer’s sketch.
Mechanical engineering

Product development of a gear casting frame

Enmac carried out the casting design and strength analysis of the parts, as well as consulting with the foundry.
Mechanical engineering

Product development of a timing gear

A hybrid bus needed a timing gear to combine the electric motor generator and a diesel engine with the vehicle’s transmission.
Mechanical engineering

Flue gas scrubber strength calculations

Strength calculations were required for the design and manufacture of a flue gas scrubber and its pipe ducts.
Mechanical engineering

Coal-tar pitch

Plant and process design was needed for storing coal-tar pitch. The design had to take into account that the substance must be kept at a constant temperature above 180°C in order to remain fluid.
Environmental services

3D-printed block

The size of a hydraulic block was to be minimised and 28 components had to be integrated into the same steel 3D-printed block. The challenges of producing a large print and internal channels had to be taken into account.
Mechanical engineering

Glue nozzle

The product has a single expensive stainless steel nozzle. The part is small and the geometry to be machined is complex
Mechanical engineering

Robotic cell to China

A Chinese customer company wanted to launch a new product on the market. No production equipment existed for manufacturing the product.
Mechanical engineering

3D-printed, optimised corner piece

The geometry of a corner piece of a rack frame is complex and there are several individual corner pieces to be machined. Machined corner pieces have long delivery times.
Mechanical engineering
Nostopalkki

Balance lifting beam

A large construction site needed to lift construction elements inside a building, outside the hook of the crane.
Mechanical engineering
Telamurskauksen testilaite

Roll crusher testing equipment

The customer needed to test a new concept and ensure its functionality in the planned roll crusher system.
Environmental services

Car wash modelling and production development

Enmac did 3D modelling for the car wash and designed the production process and logistics
Mechanical engineering

Recreational boat design and manufacturing documents

Enmac built a 3D model of the boat and made manufacturing pictures of the panel parts.
Mechanical engineering

Installation supervision of a plant project

Enmac's installation supervisor supervised the equipment supplier’s installation work and compliance with the delivery agreements, as well as acted as the site safety coordinator throughout the plant delivery.
Plant, piping and process design

Leakage management survey and preliminary design of a loading station

Enmac reviewed the implementation principles of leakage management so that the double detainment required by the groundwater area can be implemented cost-efficiently in connection with the plant expansion.
Chemical loading and unloading stations

Survey of recovering a plant’s waste heat

Finding out the most potential sources of waste energy in the plant area, as well as the potential for utilising waste heat in the city’s district heating network.
Environmental services

Body and maintenance platform calculation

The customer needed to attach information on the results of the strength calculation in terms of the load-bearing structure and maintenance platforms to the machine’s technical file.
Mechanical engineering

Change planning of a chemical unloading station

Enmac designed an environmentally compliant and cost-effective solution for the management of leakages of the unloading station located in a groundwater area.
Chemical loading and unloading stations

Shaft strength evaluation

Enmac implemented the static and fatigue dimensioning of the shaft.
Mechanical engineering

Change planning of chemical unloading stations

Enmac designed compliant loading stations for turpentine and sodium bisulphite.
Chemical loading and unloading stations

CE documentation of an integrated manufacturing system

Enmac carried out a risk assessment on the integrated manufacturing system and structured the other technical file materials of the machine together with the customer.
Mechanical engineering

Fall protection for a train loading station

The customer wanted to increase occupational safety at a train loading station. The “standard solutions” found on the market were not suitable for the site.
Chemical loading and unloading stations

Linearly movable fall protection for a chemical unloading station

The customer wanted to improve occupational safety at a chemical unloading station in case of falls.
Chemical loading and unloading stations

Preliminary design of a conveyor system and collection of procurement materials

Enmac prepared documents for the procurement and implementation of the various parts of the system.
Environmental services

Turntable of a train unloading bridge

The customer started to use a train wagon model that was smaller than the previous models. The old drawbridge did not reach the top of the train wagon.
Chemical loading and unloading stations

Lifting equipment

The customer needed to have CE-marked and approved lifting equipment for production facilities.
Chemical loading and unloading stations

Storage container fall protection

The fall protection of a customer’s tank containers was incomplete. The risk of falling was particularly high for storage containers that did not have fixed access grates.
Chemical loading and unloading stations

Reverse modeling of a scanning model

The customer needed to find out the main and connection dimensions from a plant’s laser-scanned point cloud file for the positioning of their own product.
Plant, piping and process design

High and low gear stand design

The customer needed a torque stand for testing propulsion equipment. The torque stand needed to facilitate the testing of propulsion equipment of different sizes.
Mechanical engineering

Loading control of a gantry crane

The customer needed the inspection and loading control of the transport plans of a large crane.
Mechanical engineering

Design of filter units

The customer’s aim was to harmonise the structure of filter units already in production.
Mechanical engineering

Reflector holder

The customer needed a stainless steel reflector holder for a 3D laser coordinate measuring system, with integrated pneumatic cleaning.
Mechanical engineering

Control centre manufacturing

PLC centres, motor centres, control cabinets, terminal block cabinets, pneumatic control enclosures, IT and bus cabinets
Electricity and automation services

Concept design of a water utility

Comprehensive design of a water utility.
Electricity and automation services

Battery manufacturing line

A battery manufacturing line needed to be modified for a completely new type of battery.
Electricity and automation services

Modernisation of a board mill’s pulp department

A customer was modernising the equipment of a board mill’s pulp department. The placement of new equipment and pipeline design in confined spaces had to be completed within a tight schedule.
Mechanical engineering

Virtual commissioning

Programming and commissioning of production line robots virtually in an offline program.
Electricity and automation services

Updating a slurry process

It was time to replace a customer’s slurry process equipment. The process and the confined process spaces had sites for which better solutions were wanted in connection with the replacement of the equipment.
Plant, piping and process design

Let us solve your problems

The know-how obtained by our professionals over the years is at your disposal. We are ready, so do not hesitate.

 

Contact us

Enmac Oy






High-quality and functional service

The projects are implemented in accordance with a certified operating system (ISO 9001:2015, ISO 14001:2015, ISO45001:2018) in close interaction with the customer throughout the project.